Ironman Fitness INSPIRE User Manual download pdf (Page 9)

Congratulations!

You have completed the assembly of your new Ironman INSPIRE Treadmill!

Assembly

10. Install the Left and Right Fenders to Base

using Philip Screw ST4.2X16 as shown in

Figure 8.

Figure 8: Left and Right Fender Installation

LEFT FENDER

BASE

PHILIP SCREW

ST4.2x16

RIGHT FENDER

11. Assembly is complete. Move Treadmill to

permanent location. See Moving Instructions.

Before operating the treadmill, adjust Levelers so

that Base of treadmill does not wobble. See

Figure 9.

Figure 9: Adjust Levelers

9. If Safety Latch Assembly will not secure cor-

rectly, turn the four Screws counter-clockwise a

half turn.

NOTE: DO NOT REMOVE SCREWS FROM

LATCH HOUSING.

Next, slide the Safety Latch Housing up or down

to align the Safety Latch with center of hole locat-

ed on the left handlebar. Tighten the four Screws

to secure the assembly in place.

SCREWS

LATCH HOUSING

Figure 7: Safety Latch Adjustment

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

No comments

Ironman Fitness INSPIRE User Manual Page 9