Ironman Fitness Aeros User Manual download pdf (Page 16)

Trouble Shooting Guide

Symptom Possible Cause Solution

DC adapter is not plugged into

wall outlet?

Plug DC adapter into wall outlet

DC adapter cord is not

plugged into Aeros?

Plug DC adapter cord into Aeros power socket

Console cable is not

connected?

Verify that console cable is connected properly

Console has no power

The computer is faulty? Call the Ironman Fitness service number

Check that the sensor magnet is correctly fitted and

passes in front of the sensor

Check that the gap between sensor and the magnet

is 3mm or less

Check that all the computer plugs and sockets are

correctly and firmly connected

Computer isn't receiving a

signal from the sensor?

Check that the computer wires are not damaged

The sensor is faulty? If all above checks are okay, then replace sensor

Strides/Min or Speed

shows 0

The computer is faulty? Call the Ironman Fitness service number

Noise from motor

Symptoms include an

unusually loud noise coming

from the motor, which means

the gears are not meshing

correctly

Try reversing the resistance and try again. If this

fails, then replace the motor.

CLEANING/MAINTENANCE -

Your Aeros Elliptical has been manufactured to withstand many hours of use with minimal

maintenance. It may occasionally require silicone to be sprayed on the moving parts (available

at most stores).

Periodically wipe down your machine with mild, soapy water or a diluted general purpose

household cleaner. Machine should be wiped down to remove sweat after each use.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Ironman Fitness Aeros User Manual Page 16